Starting at $839

For a true masonry look, the Lo-Rider Series features a low profile hearth, so the firebox appears to nearly rest on the floor, providing the tallest fireplace opening and a truly expansive viewing area.

  • Tallest opening available for full view of fire
  • Low profile hearth
  • True masonry look
  • Available facing options include Perimeter Trims, Classic Arched Faces and Cabinet Doors with Screen

Available Sizes:

  • 32"
  • 36"

Accessories that fit your home and lifestyle

Available in two sizes and two colors, these curved trim kits must be attached before installing the product in the wall.

Draws in outside combustion air for your firebox rather than pulling it from the room. 

These classic arched fronts feature a lower door for control access.

Available in two sizes, these frames are required for cabinet door installation.

Available in two sizes, these screened door sets provide a decorative accent that adds allure to your firebox.

Available in two sizes, these surrounds give a built-in look to your product's wall installation. Choose between a Honey Oak or Dark Cherry finish.

Available in two sizes, these surrounds are designed to finish out your product's corner installation. Choose Honey Oak or Dark Cherry finish.

Our Limited Lifetime Warranty is the strongest and most comprehensive in the industry. It illustrates our commitment to producing the best and most reliable products available—and allows you to own your hearth appliance with confidence. Season after season, year after year.

Specifications

Model Specifications

LoRider 32

Size:32
Appliance Width:37"
Appliance Height:34-3/8"
Appliance Depth:16"
Hearth Front Width:28-5/8"
Hearth Front Height:28"
Hearth Depth:12-3/4"
Hearth Rear Width:22-3/8"
Hearth Rear Height:23-/4"
Viewing Area:28-7/8 x 28-3/8"

LoRider 36

Size:36
Appliance Width:41"
Appliance Height:37-3/8"
Appliance Depth:18"
Hearth Front Width:32-1/2"
Hearth Front Height:30-1/4"
Hearth Depth:15"
Hearth Rear Width:25-7/8"
Hearth Rear Height:25-5/8"
Viewing Area:33-7/8 x 31-1/4"

Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

Framing depth will vary if you are installing the lower profile power vent (PVLP-SLP) with a minimum vent configuration. 12-1/2” is needed from the back of the appliance to the outside of the exterior wall. Refer to manual for details.

BTU: 1st hour output uses high burn efficiency number. BTU will vary depending on the type of fuel used and moisture content of the fuel.

This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.

Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used.

Fuel density and pellet shape will affect hopper capacity.

Weighted Average LHV (Low Heating Value) efficiency.